Source note · Setting up analog devices and ATAs on Webex Calling
To use a VG4xx ATA outside Webex Calling after onboarding, the device must be reset to Cisco factory default settings.
Checked 2026-09-30
To use the VG4xx ATA outside of Webex Calling later, reset the device to the Cisco factory default settings.
- Vendor
- Cisco
- Product
- Cisco VG4xx ATA
- Subsystem
- onboarding
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure your Cisco Voice Gateway VG400, VG410, or VG420 in Control Hub — Cisco · tier 2 current vendor documentation · section 'Prepare VG4xx ATA for onboarding Webex Calling', note after prerequisites
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-factory-reset-exit. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-factory-reset-exit
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-vg-factory-reset-exit,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-factory-reset-exit},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-factory-reset-exit},
note = {Source note webex-calling-analog-ata-setup-vg-factory-reset-exit, checked 2026-09-30}
}