Source note · Setting up analog devices and ATAs on Webex Calling
Remaining VG4xx ATA ports are assigned in Control Hub by opening Devices, selecting the VG4xx ATA, choosing Configure ports and adding the preconfigured users and workspaces.
Checked 2026-09-30
Add the preconfigured users and workspaces to VG4xx ATA ports as required.
- Vendor
- Cisco
- Product
- Webex Calling
- Subsystem
- Control Hub devices
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure your Cisco Voice Gateway VG400, VG410, or VG420 in Control Hub — Cisco · tier 2 current vendor documentation · section on assigning users and workspaces to remaining ports
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-configure-ports. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-configure-ports
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-vg-configure-ports,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-vg-configure-ports},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-vg-configure-ports},
note = {Source note webex-calling-analog-ata-setup-vg-configure-ports, checked 2026-09-30}
}