Source note · Setting up analog devices and ATAs on Webex Calling
Cisco ATA device settings can be set in Control Hub at three levels: organization (Services > Calling > Settings > Service > Configure Default Device Settings), location (Management > Locations > Calling tab > Device management) and device (Management > Devices > the device > All Configurations).
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Webex Calling
- Subsystem
- device settings
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure and modify device settings in Webex Calling — Cisco Webex · tier 2 current vendor documentation · organization, location and device level procedures
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-device-settings. WarmTransfer. https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-device-settings
BibTeX
@misc{warmtransfer-claim-webex-calling-analog-ata-setup-ata-device-settings,
title = {Setting up analog devices and ATAs on Webex Calling: source note webex-calling-analog-ata-setup-ata-device-settings},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/webex-calling-analog-ata-setup-ata-device-settings},
note = {Source note webex-calling-analog-ata-setup-ata-device-settings, checked 2026-09-30}
}