Source note · Voice VLAN and LLDP-MED and CDP and PoE for IP phones
On Catalyst 9300, the global command hw-module switch <n> upoe-plus enables 802.3bt mode and power-cycles the switch, and in that mode Cisco UPOE switches act as 802.3bt Type 3 devices supporting up to Class 6 on every port.
Checked 2026-09-24
- Vendor
- Cisco
- Product
- Catalyst 9300 Series Switches
- Subsystem
- IEEE 802.3bt mode
- Deployment
- on-premises
- Region
- not restricted
- Release range
- IOS XE 17.18.x
- Checked
- 2026-09-24
Sources
- Interface and Hardware Components Configuration Guide, Cisco IOS XE 17.18.x (Catalyst 9300 Switches) - Configuring Power over Ethernet — Cisco Systems · tier 2 current vendor documentation · Configuring Power over Ethernet > Supported Protocols and Standards
Cite this note
APA
WarmTransfer. (2026, September 24). Voice VLAN and LLDP-MED and CDP and PoE for IP phones: source note voice-vlan-lldp-poe-c9300-bt-mode-power-cycle. WarmTransfer. https://warmtransfer.net/knowledge/claims/voice-vlan-lldp-poe-c9300-bt-mode-power-cycle
BibTeX
@misc{warmtransfer-claim-voice-vlan-lldp-poe-c9300-bt-mode-power-cycle,
title = {Voice VLAN and LLDP-MED and CDP and PoE for IP phones: source note voice-vlan-lldp-poe-c9300-bt-mode-power-cycle},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/voice-vlan-lldp-poe-c9300-bt-mode-power-cycle},
note = {Source note voice-vlan-lldp-poe-c9300-bt-mode-power-cycle, checked 2026-09-24}
}