SIP Gateway supports dynamic emergency calling for devices that share network attributes (local IP and subnet length, or chassis ID and port) provisioned in the Teams admin center; otherwise it falls back to registered addresses, which are not supported for Direct Routing.
Checked 2026-09-30
Currently, registered addresses are not supported for Direct Routing scenarios.
- Vendor
- Microsoft
- Product
- Microsoft Teams Phone
- Subsystem
- SIP Gateway emergency calling
- Deployment
- multi-tenant
- Region
- not restricted
- Release range
- current as of 2026-09-30
- Checked
- 2026-09-30
Sources
- Configure SIP Gateway — Microsoft · tier 2 current vendor documentation · Emergency calling
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up SIP Gateway for Cisco and Poly phones on Teams: source note teams-sip-gateway-setup-e911-attributes. WarmTransfer. https://warmtransfer.net/knowledge/claims/teams-sip-gateway-setup-e911-attributes
BibTeX
@misc{warmtransfer-claim-teams-sip-gateway-setup-e911-attributes,
title = {Setting up SIP Gateway for Cisco and Poly phones on Teams: source note teams-sip-gateway-setup-e911-attributes},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/teams-sip-gateway-setup-e911-attributes},
note = {Source note teams-sip-gateway-setup-e911-attributes, checked 2026-09-30}
}