Source note · Setting up Mobile and Remote Access on Cisco Expressway
Cisco does not recommend a single-NIC Expressway-E with static NAT; if used the Expressway-E address must be an FQDN resolving to the public IP and the firewall must support NAT reflection.
Checked 2026-09-24
- Vendor
- Cisco
- Product
- Cisco Expressway
- Subsystem
- network
- Deployment
- on-premises
- Region
- not restricted
- Release range
- current as of 2026-09-24
- Checked
- 2026-09-24
Sources
- Mobile and Remote Access Through Cisco Expressway Deployment Guide (X15.2) - MRA Requirements and Prerequisites — Cisco Systems · tier 2 current vendor documentation · Expressway-E deployment, single NIC with static NAT
Cite this note
APA
WarmTransfer. (2026, September 24). Setting up Mobile and Remote Access on Cisco Expressway: source note expressway-mra-setup-single-nic-nat-reflection. WarmTransfer. https://warmtransfer.net/knowledge/claims/expressway-mra-setup-single-nic-nat-reflection
BibTeX
@misc{warmtransfer-claim-expressway-mra-setup-single-nic-nat-reflection,
title = {Setting up Mobile and Remote Access on Cisco Expressway: source note expressway-mra-setup-single-nic-nat-reflection},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/expressway-mra-setup-single-nic-nat-reflection},
note = {Source note expressway-mra-setup-single-nic-nat-reflection, checked 2026-09-24}
}