Source note · Setting up a CVP comprehensive call flow in UCCE
The gateway chapter's example outbound VoIP dial-peer toward the Unified CVP Call Server uses session protocol sipv2, an ipv4 session target, a voice-class codec, dtmf-relay rtp-nte and no vad.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Unified Customer Voice Portal
- Subsystem
- Ingress gateway
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 15.0(1)
- Checked
- 2026-09-30
Sources
- Configuration Guide for Cisco Unified Customer Voice Portal, Release 15.0(1) - Gateway Configuration — Cisco Systems · tier 2 current vendor documentation · Configure Gateway Settings for Comprehensive Call Flow Model, example gateway settings, VoIP dial-peer
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up a CVP comprehensive call flow in UCCE: source note cvp-comprehensive-call-flow-setup-gw-voip-dial-peer. WarmTransfer. https://warmtransfer.net/knowledge/claims/cvp-comprehensive-call-flow-setup-gw-voip-dial-peer
BibTeX
@misc{warmtransfer-claim-cvp-comprehensive-call-flow-setup-gw-voip-dial-peer,
title = {Setting up a CVP comprehensive call flow in UCCE: source note cvp-comprehensive-call-flow-setup-gw-voip-dial-peer},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cvp-comprehensive-call-flow-setup-gw-voip-dial-peer},
note = {Source note cvp-comprehensive-call-flow-setup-gw-voip-dial-peer, checked 2026-09-30}
}