Source note · Unified CM SIP normalization and transparency scripts
After a script is assigned or changed, the configuration must be saved and applied and the trunk reset before the change takes effect.
Checked 2026-09-25
Save the configuration, Apply Config followed by reset of the trunk in order for the changes to take effect.
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- configuration
- Deployment
- on-premises
- Region
- not restricted
- Release range
- written against 11.5
- Checked
- 2026-09-25
Sources
- Configure SIP Normalization Script in CCM — Cisco Systems (TAC) · tier 2 current vendor documentation · Configure > Apply Script on Trunk in CUCM (final step)
Cite this note
APA
WarmTransfer. (2026, September 25). Unified CM SIP normalization and transparency scripts: source note cucm-sip-normalization-reset-after-change. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-sip-normalization-reset-after-change
BibTeX
@misc{warmtransfer-claim-cucm-sip-normalization-reset-after-change,
title = {Unified CM SIP normalization and transparency scripts: source note cucm-sip-normalization-reset-after-change},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-sip-normalization-reset-after-change},
note = {Source note cucm-sip-normalization-reset-after-change, checked 2026-09-25}
}