When a hunt group points at directory numbers that have Single Number Reach enabled, the call does not extend to the SNR remote destinations unless all devices in the hunt group are logged in.
Checked 2026-10-02
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- Cisco Unified Mobility
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs, current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Cisco Unified Mobility — Cisco Systems · tier 2 current vendor documentation · Restrictions table, Single Number Reach with Hunt Groups
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-snr-hunt-group. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-snr-hunt-group
BibTeX
@misc{warmtransfer-claim-cucm-mobile-connect-setup-snr-hunt-group,
title = {Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-snr-hunt-group},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-snr-hunt-group},
note = {Source note cucm-mobile-connect-setup-snr-hunt-group, checked 2026-10-02}
}