Mobile Voice Access is enabled on the publisher's Cisco CallManager service parameters by setting Enable Mobile Voice Access to True and entering the Mobile Voice Access Number users dial, then restarting the Cisco CallManager service.
Checked 2026-10-02
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- Cisco Unified Mobility
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs, current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Cisco Unified Mobility — Cisco Systems · tier 2 current vendor documentation · Configure Mobile Voice Access task flow (Enable Mobile Voice Access; restart Cisco CallManager)
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-mva-service-parameters. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-mva-service-parameters
BibTeX
@misc{warmtransfer-claim-cucm-mobile-connect-setup-mva-service-parameters,
title = {Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-mva-service-parameters},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-mva-service-parameters},
note = {Source note cucm-mobile-connect-setup-mva-service-parameters, checked 2026-10-02}
}