An access list is applied in the remote destination's ring schedule area by choosing either 'Ring this destination only if caller is in' or 'Do not ring this destination if caller is in' and selecting the list.
Checked 2026-10-02
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- Cisco Unified Mobility
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs, current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Cisco Unified Mobility — Cisco Systems · tier 2 current vendor documentation · Configure an Access List / Configure a Remote Destination, ring schedule area
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-access-list-assignment. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-access-list-assignment
BibTeX
@misc{warmtransfer-claim-cucm-mobile-connect-setup-access-list-assignment,
title = {Setting up Single Number Reach and Mobile Connect in Unified CM: source note cucm-mobile-connect-setup-access-list-assignment},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-mobile-connect-setup-access-list-assignment},
note = {Source note cucm-mobile-connect-setup-access-list-assignment, checked 2026-10-02}
}