In Release 15, media resources are made available to calls by putting them in a media resource group list assigned to a device pool or to an individual device, and an individual device by default uses the media resources assigned to its device pool.
Checked 2026-09-30
The default setting for individual devices is to use the media resources that are assigned to the device pool that the device is using.
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- media-resource-manager
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs as of 2026-09-30
- Checked
- 2026-09-30
Sources
- System Configuration Guide for Cisco Unified Communications Manager Release 15 and SUs - Configure Media Resources — Cisco Systems · tier 2 current vendor documentation · section 'About Media Resources'
Cite this note
APA
WarmTransfer. (2026, September 30). Troubleshooting Unified CM media resource allocation failures: source note cucm-media-resource-failures-device-default-pool-mrgl. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-media-resource-failures-device-default-pool-mrgl
BibTeX
@misc{warmtransfer-claim-cucm-media-resource-failures-device-default-pool-mrgl,
title = {Troubleshooting Unified CM media resource allocation failures: source note cucm-media-resource-failures-device-default-pool-mrgl},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-media-resource-failures-device-default-pool-mrgl},
note = {Source note cucm-media-resource-failures-device-default-pool-mrgl, checked 2026-09-30}
}