Before Unified CM 10.0, a user dialing a directory number had to wait out T302 before the call routed if an overlapping pattern was configured, because a DN could not be marked urgent.
Checked 2026-10-02
Before 10.0 CUCM release, the user had to observe the T302 (inter digit timer) before the call got routed to the dialed directory number, if there was an overlap pattern configured.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- directory number
- Deployment
- on-premises
- Region
- not restricted
- Release range
- releases before 10.0
- Checked
- 2026-10-02
Sources
- Urgent Priority Configuration on Directory Number — Cisco Systems · tier 2 current vendor documentation · User Experience
Cite this note
APA
WarmTransfer. (2026, October 2). Troubleshooting calls that wait several seconds before routing in Unified CM: source note cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait
BibTeX
@misc{warmtransfer-claim-cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait,
title = {Troubleshooting calls that wait several seconds before routing in Unified CM: source note cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait},
note = {Source note cucm-interdigit-delay-troubleshooting-pre-v10-dn-wait, checked 2026-10-02}
}