Source note · Unified CM globalized dial plan and +E.164 routing
The clusterwide incoming calling party prefix service parameters apply to a device only when the corresponding prefix is left at its default at both the device and the device pool level.
Checked 2026-09-25
the prefix setting for that phone must be set to the default option at both the device and device pool levels
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- incoming calling party settings
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 15 and SUs
- Checked
- 2026-09-25
Sources
- System Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Calling Party Normalization — Cisco · tier 2 current vendor documentation · Calling Party Normalization chapter, clusterwide service parameter note
Cite this note
APA
WarmTransfer. (2026, September 25). Unified CM globalized dial plan and +E.164 routing: source note cucm-dial-plan-globalization-service-param-precedence. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-dial-plan-globalization-service-param-precedence
BibTeX
@misc{warmtransfer-claim-cucm-dial-plan-globalization-service-param-precedence,
title = {Unified CM globalized dial plan and +E.164 routing: source note cucm-dial-plan-globalization-service-param-precedence},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-dial-plan-globalization-service-param-precedence},
note = {Source note cucm-dial-plan-globalization-service-param-precedence, checked 2026-09-25}
}