Source note · Unified CM device pools and device configuration model
Cisco warns that enabling autoregistration carries a security risk, and says to disable it on the node once new devices have been registered.
Checked 2026-09-24
Disable autoregistration for the node as soon as you are finished registering new devices.
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- autoregistration
- Deployment
- on-premises, dedicated-instance
- Region
- not restricted
- Release range
- 15 and SUs
- Checked
- 2026-09-24
Sources
- System Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs - Configure Autoregistration — Cisco Systems · tier 2 current vendor documentation · Configure Autoregistration / Autoregistration Overview and Enable Autoregistration
Cite this note
APA
WarmTransfer. (2026, September 24). Unified CM device pools and device configuration model: source note cucm-device-pools-autoreg-security-risk. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-device-pools-autoreg-security-risk
BibTeX
@misc{warmtransfer-claim-cucm-device-pools-autoreg-security-risk,
title = {Unified CM device pools and device configuration model: source note cucm-device-pools-autoreg-security-risk},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-device-pools-autoreg-security-risk},
note = {Source note cucm-device-pools-autoreg-security-risk, checked 2026-09-24}
}