Source note · Unified CM Device Mobility
In Cisco TAC's troubleshooting walkthrough, the roaming device pool was not selected because the Physical Location was set to None, and checking Physical Location is a listed troubleshooting step.
Checked 2026-09-25
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- troubleshooting
- Deployment
- on-premises
- Region
- not restricted
- Release range
- tested on 11.5.1
- Checked
- 2026-09-25
Sources
- Configure and Troubleshoot Device Mobility — Cisco Systems · tier 2 current vendor documentation · Troubleshoot section, Physical Location verification step
Cite this note
APA
WarmTransfer. (2026, September 25). Unified CM Device Mobility: source note cucm-device-mobility-physloc-none-tac. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-device-mobility-physloc-none-tac
BibTeX
@misc{warmtransfer-claim-cucm-device-mobility-physloc-none-tac,
title = {Unified CM Device Mobility: source note cucm-device-mobility-physloc-none-tac},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-device-mobility-physloc-none-tac},
note = {Source note cucm-device-mobility-physloc-none-tac, checked 2026-09-25}
}