Source note · Unified CM SIP trunk to CUBE configuration
After a Unified CM SIP trunk is modified, the trunk must be reset or restarted for the change to take effect.
Checked 2026-09-24
Once this is modified, you must reset/restart the trunk
- Vendor
- Cisco
- Product
- Unified Communications Manager
- Subsystem
- SIP trunk
- Deployment
- on-premises
- Region
- not restricted
- Release range
- not stated; published 2014
- Checked
- 2026-09-24
Sources
- Configure CUCM to CUBE Integration - Configuration Example — Cisco · tier 2 current vendor documentation · Configure, Unified CM trunk notes
Cite this note
APA
WarmTransfer. (2026, September 24). Unified CM SIP trunk to CUBE configuration: source note cucm-config-sip-trunk-to-cube-ucm-trunk-reset. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-config-sip-trunk-to-cube-ucm-trunk-reset
BibTeX
@misc{warmtransfer-claim-cucm-config-sip-trunk-to-cube-ucm-trunk-reset,
title = {Unified CM SIP trunk to CUBE configuration: source note cucm-config-sip-trunk-to-cube-ucm-trunk-reset},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-config-sip-trunk-to-cube-ucm-trunk-reset},
note = {Source note cucm-config-sip-trunk-to-cube-ucm-trunk-reset, checked 2026-09-24}
}