Source note · Unified CM SIP trunk to CUBE configuration
On CUBE, the dial peer toward Unified CM for SIP TLS uses session transport tcp tls and srtp, with a PKI trustpoint referenced by crypto signaling.
Checked 2026-09-24
- Vendor
- Cisco
- Product
- Cisco Unified Border Element
- Subsystem
- SIP TLS
- Deployment
- on-premises
- Region
- not restricted
- Release range
- not stated; published 2020
- Checked
- 2026-09-24
Sources
- Configure SIP TLS Between CUCM-CUBE/CUBE-SBC With CA Signed Certificates — Cisco · tier 2 current vendor documentation · Configure, CUBE section
Cite this note
APA
WarmTransfer. (2026, September 24). Unified CM SIP trunk to CUBE configuration: source note cucm-config-sip-trunk-to-cube-cube-tls-dialpeer. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-config-sip-trunk-to-cube-cube-tls-dialpeer
BibTeX
@misc{warmtransfer-claim-cucm-config-sip-trunk-to-cube-cube-tls-dialpeer,
title = {Unified CM SIP trunk to CUBE configuration: source note cucm-config-sip-trunk-to-cube-cube-tls-dialpeer},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-config-sip-trunk-to-cube-cube-tls-dialpeer},
note = {Source note cucm-config-sip-trunk-to-cube-cube-tls-dialpeer, checked 2026-09-24}
}