Source note · Unified CM route patterns and partitions configuration
Unified CM searches for a route pattern that matches an external dial string and uses it to send the call to a gateway or route list.
Checked 2026-09-24
The system searches for a configured route pattern that matches the external dial string and uses it to direct the call to a gateway or route list.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- call routing
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs
- Checked
- 2026-09-24
Sources
- System Configuration Guide for Cisco Unified Communications Manager Release 15 and SUs - Configure Call Routing — Cisco · tier 2 current vendor documentation · Call Routing Overview > Route Patterns
Cite this note
APA
WarmTransfer. (2026, September 24). Unified CM route patterns and partitions configuration: source note cucm-config-route-patterns-and-partitions-rp-purpose. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-config-route-patterns-and-partitions-rp-purpose
BibTeX
@misc{warmtransfer-claim-cucm-config-route-patterns-and-partitions-rp-purpose,
title = {Unified CM route patterns and partitions configuration: source note cucm-config-route-patterns-and-partitions-rp-purpose},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-config-route-patterns-and-partitions-rp-purpose},
note = {Source note cucm-config-route-patterns-and-partitions-rp-purpose, checked 2026-09-24}
}