Source note · Unified CM route patterns and partitions configuration
For a pattern such as 9.@, where 9 is the external access code, the Discard Digits option strips the pre-dot digits so the PSTN can route the call.
Checked 2026-09-24
use the Discard Digits option to strip the pre-dot digit from the dialed string so that the PSTN can route the call
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- call routing
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15 and SUs
- Checked
- 2026-09-24
Sources
- System Configuration Guide for Cisco Unified Communications Manager Release 15 and SUs - Configure Call Routing — Cisco · tier 2 current vendor documentation · Example of Pre-dot Digit Removal
Cite this note
APA
WarmTransfer. (2026, September 24). Unified CM route patterns and partitions configuration: source note cucm-config-route-patterns-and-partitions-predot-discard. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-config-route-patterns-and-partitions-predot-discard
BibTeX
@misc{warmtransfer-claim-cucm-config-route-patterns-and-partitions-predot-discard,
title = {Unified CM route patterns and partitions configuration: source note cucm-config-route-patterns-and-partitions-predot-discard},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-config-route-patterns-and-partitions-predot-discard},
note = {Source note cucm-config-route-patterns-and-partitions-predot-discard, checked 2026-09-24}
}