Local route groups let a single set of route patterns serve multiple locations by choosing the egress gateway from the calling device.
Checked 2026-09-30
Local route groups let you use a single set of route patterns for multiple locations.
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- local route groups
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 15 and SUs
- Checked
- 2026-09-30
Sources
- System Configuration Guide for Cisco Unified Communications Manager Release 15 and SUs - Configure Call Routing — Cisco · tier 2 current vendor documentation · Configure Call Routing > Configure Local Route Groups
Cite this note
APA
WarmTransfer. (2026, September 30). Troubleshooting Unified CM call routing failures and reorder tone: source note cucm-call-routing-failures-lrg-single-pattern-set. WarmTransfer. https://warmtransfer.net/knowledge/claims/cucm-call-routing-failures-lrg-single-pattern-set
BibTeX
@misc{warmtransfer-claim-cucm-call-routing-failures-lrg-single-pattern-set,
title = {Troubleshooting Unified CM call routing failures and reorder tone: source note cucm-call-routing-failures-lrg-single-pattern-set},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cucm-call-routing-failures-lrg-single-pattern-set},
note = {Source note cucm-call-routing-failures-lrg-single-pattern-set, checked 2026-09-30}
}