Source note · Setting up TLS and SRTP on CUBE
After applying the security profile to the trunk, Save and then Apply Config resets the Unified CM trunk so the change takes effect.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Cisco Unified Communications Manager
- Subsystem
- SIP trunk
- Deployment
- on-premises
- Region
- not restricted
- Release range
- Release 15
- Checked
- 2026-09-30
Sources
- Security Guide for Cisco Unified Communications Manager, Release 15 and SUs - Trunk and Gateway SIP Security — Cisco Systems · tier 2 current vendor documentation · Deployment steps > apply profile, Save, Apply Config
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up TLS and SRTP on CUBE: source note cube-tls-srtp-setup-cucm-apply-config. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-tls-srtp-setup-cucm-apply-config
BibTeX
@misc{warmtransfer-claim-cube-tls-srtp-setup-cucm-apply-config,
title = {Setting up TLS and SRTP on CUBE: source note cube-tls-srtp-setup-cucm-apply-config},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-tls-srtp-setup-cucm-apply-config},
note = {Source note cube-tls-srtp-setup-cucm-apply-config, checked 2026-09-30}
}