Source note · Setting up TLS and SRTP on CUBE
The sip-ua command crypto signaling {remote-addr <ip> <mask> | default} [tls-profile <tag> | trustpoint <name>] selects the trustpoint or TLS profile CUBE uses for TLS connections, either for all peers or for a specific remote address.
Checked 2026-09-30
- Vendor
- Cisco
- Product
- Cisco Unified Border Element
- Subsystem
- SIP TLS
- Deployment
- on-premises
- Region
- not restricted
- Release range
- IOS XE 17.6 onwards book
- Checked
- 2026-09-30
Sources
- Cisco Unified Border Element Configuration Guide - Cisco IOS XE 17.6 Onwards - SIP TLS Support — Cisco · tier 2 current vendor documentation · SIP TLS Support (PDF m_sip_tls_support_cube.pdf) > configuration task, crypto signaling step
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up TLS and SRTP on CUBE: source note cube-tls-srtp-setup-crypto-signaling-syntax. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-tls-srtp-setup-crypto-signaling-syntax
BibTeX
@misc{warmtransfer-claim-cube-tls-srtp-setup-crypto-signaling-syntax,
title = {Setting up TLS and SRTP on CUBE: source note cube-tls-srtp-setup-crypto-signaling-syntax},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-tls-srtp-setup-crypto-signaling-syntax},
note = {Source note cube-tls-srtp-setup-crypto-signaling-syntax, checked 2026-09-30}
}