Cisco recommends using incoming called-number for inbound dial-peer matching because call setups always include DNIS information.
Checked 2026-10-02
Because call setups always include DNIS information, it is recommended to use the incoming called-number command for inbound dial peer matching.
- Vendor
- Cisco
- Product
- Cisco IOS voice gateway
- Subsystem
- inbound-dial-peer-matching
- Deployment
- on-premises
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Understand Matching Inbound/Outbound Dial Peers on IOS Platforms — Cisco Systems · tier 2 current vendor documentation · section 'Inbound Dial Peer Matching', rule 1 note
Cite this note
APA
WarmTransfer. (2026, October 2). Troubleshooting CUBE calls that match the wrong dial-peer: source note cube-dial-peer-matching-troubleshooting-recommend-incoming-cn. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-dial-peer-matching-troubleshooting-recommend-incoming-cn
BibTeX
@misc{warmtransfer-claim-cube-dial-peer-matching-troubleshooting-recommend-incoming-cn,
title = {Troubleshooting CUBE calls that match the wrong dial-peer: source note cube-dial-peer-matching-troubleshooting-recommend-incoming-cn},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-dial-peer-matching-troubleshooting-recommend-incoming-cn},
note = {Source note cube-dial-peer-matching-troubleshooting-recommend-incoming-cn, checked 2026-10-02}
}