Cisco's Local Gateway guide configures destination-pattern BAD.BAD on outbound dial peers and states a dummy destination pattern is required when routing via an inbound dial-peer group.
Checked 2026-10-02
A dummy destination pattern is required when routing outbound calls using an inbound dial-peer group.
- Vendor
- Cisco
- Product
- Cisco Unified Border Element
- Subsystem
- dial-peer-group
- Deployment
- on-premises
- Region
- not restricted
- Release range
- current as of 2026-10-02
- Checked
- 2026-10-02
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · section 'Configure Webex Calling registration-based trunk', destination-pattern BAD.BAD explanation
Cite this note
APA
WarmTransfer. (2026, October 2). Troubleshooting CUBE calls that match the wrong dial-peer: source note cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern
BibTeX
@misc{warmtransfer-claim-cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern,
title = {Troubleshooting CUBE calls that match the wrong dial-peer: source note cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern},
note = {Source note cube-dial-peer-matching-troubleshooting-lgw-dummy-pattern, checked 2026-10-02}
}