Source note · Setting up CUBE for a carrier SIP trunk
Cisco's current registration-based trunk example puts registrar (with expires and refresh-ratio), credentials, authentication, bind control and media, sip-profiles and outbound-proxy inside one voice class tenant, and the trunk dial-peer uses session target sip-server with voice-class sip tenant.
Checked 2026-09-25
- Vendor
- Cisco
- Product
- Cisco IOS XE Local Gateway (CUBE)
- Subsystem
- SIP registration
- Deployment
- on-premises, hybrid
- Region
- not restricted
- Release range
- current as of 2026-09-25
- Checked
- 2026-09-25
Sources
- Configure Local Gateway on Cisco IOS XE for Webex Calling — Cisco Systems, Inc. (Webex Help Center) · tier 2 current vendor documentation · Registration-based trunk configuration; voice class tenant 100 and dial-peer voice 100
Cite this note
APA
WarmTransfer. (2026, September 25). Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-tenant-registration-example. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-tenant-registration-example
BibTeX
@misc{warmtransfer-claim-cube-carrier-trunk-setup-tenant-registration-example,
title = {Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-tenant-registration-example},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-tenant-registration-example},
note = {Source note cube-carrier-trunk-setup-tenant-registration-example, checked 2026-09-25}
}