Source note · Setting up CUBE for a carrier SIP trunk

For outbound SIP dial-peer selection CUBE checks, in order, destination route-string, destination URI with carrier-id, destination-pattern with carrier-id, destination URI, destination-pattern, then target carrier-id; destination e164-pattern-map can also be used for pattern-based routing.

Checked 2026-09-25

Vendor: Cisco
Product: Cisco Unified Border Element
Subsystem: dial-peers
Deployment: on-premises
Region: not restricted
Release range: Cisco IOS XE 17.6 onwards
Checked: 2026-09-25

Sources

Cisco Unified Border Element Configuration Guide - Cisco IOS XE 17.6 Onwards - Configure Dial Peers — Cisco · tier 2 current vendor documentation · Configure Dial Peers; outbound dial-peer matching

Cite this note

APA

WarmTransfer. (2026, September 25). Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-outbound-match-order. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-outbound-match-order

BibTeX

@misc{warmtransfer-claim-cube-carrier-trunk-setup-outbound-match-order,
  title  = {Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-outbound-match-order},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-outbound-match-order},
  note   = {Source note cube-carrier-trunk-setup-outbound-match-order, checked 2026-09-25}
}

Read in context