Source note · Setting up CUBE for a carrier SIP trunk
show dial-peer voice summary, show call active voice brief, debug voip ccapi inout and debug ccsip messages are the commands Cisco gives for checking dial-peer status, active calls and dial-peer matching.
Checked 2026-09-25
- Vendor
- Cisco
- Product
- Cisco IOS
- Subsystem
- troubleshooting
- Deployment
- on-premises
- Region
- not restricted
- Release range
- current as of 2026-09-25
- Checked
- 2026-09-25
Sources
- Understand IOS and IOS XE Call Routing — Cisco Systems · tier 2 current vendor documentation · Verify and troubleshoot sections
Cite this note
APA
WarmTransfer. (2026, September 25). Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-call-verify-commands. WarmTransfer. https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-call-verify-commands
BibTeX
@misc{warmtransfer-claim-cube-carrier-trunk-setup-call-verify-commands,
title = {Setting up CUBE for a carrier SIP trunk: source note cube-carrier-trunk-setup-call-verify-commands},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cube-carrier-trunk-setup-call-verify-commands},
note = {Source note cube-carrier-trunk-setup-call-verify-commands, checked 2026-09-25}
}