Source note · Setting up 802.1X authentication for Cisco IP phones
For an LSC Install/Upgrade, the Operation Completes By date and time should be at least one hour in the future, and the change is saved and then applied with Apply Config.
Checked 2026-10-02
Enter a date and time that is at least one hour in the future
- Vendor
- Cisco
- Product
- Cisco Unified CM
- Subsystem
- CAPF
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 8.0(1) and later
- Checked
- 2026-10-02
Sources
- Configure LSC on IP Phone with CUCM — Cisco Systems · tier 2 current vendor documentation · Configure > Phone Configuration CAPF Information
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up 802.1X authentication for Cisco IP phones: source note cisco-phone-8021x-setup-op-completes-by. WarmTransfer. https://warmtransfer.net/knowledge/claims/cisco-phone-8021x-setup-op-completes-by
BibTeX
@misc{warmtransfer-claim-cisco-phone-8021x-setup-op-completes-by,
title = {Setting up 802.1X authentication for Cisco IP phones: source note cisco-phone-8021x-setup-op-completes-by},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cisco-phone-8021x-setup-op-completes-by},
note = {Source note cisco-phone-8021x-setup-op-completes-by, checked 2026-10-02}
}