Source note · Setting up 802.1X authentication for Cisco IP phones
When CAPF settings are applied with Bulk Administration, the Authentication Mode chosen must match the phone security profile's authentication mode or the operation cannot complete.
Checked 2026-10-02
- Vendor
- Cisco
- Product
- Cisco Unified CM
- Subsystem
- CAPF
- Deployment
- on-premises
- Region
- not restricted
- Release range
- 8.0(1) and later
- Checked
- 2026-10-02
Sources
- Configure LSC on IP Phone with CUCM — Cisco Systems · tier 2 current vendor documentation · Configure > Bulk Administration note
Cite this note
APA
WarmTransfer. (2026, October 2). Setting up 802.1X authentication for Cisco IP phones: source note cisco-phone-8021x-setup-bulk-auth-mode-match. WarmTransfer. https://warmtransfer.net/knowledge/claims/cisco-phone-8021x-setup-bulk-auth-mode-match
BibTeX
@misc{warmtransfer-claim-cisco-phone-8021x-setup-bulk-auth-mode-match,
title = {Setting up 802.1X authentication for Cisco IP phones: source note cisco-phone-8021x-setup-bulk-auth-mode-match},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/cisco-phone-8021x-setup-bulk-auth-mode-match},
note = {Source note cisco-phone-8021x-setup-bulk-auth-mode-match, checked 2026-10-02}
}