Source note · Cisco Emergency Responder setup

Each ERL route pattern is a prefix, a dot and the emergency number (for example 10.911) in the E911 partition, discarding PreDot digits, with Use Calling Party's External Phone Number Mask selected and the gateway to the local PSAP chosen.

Checked 2026-09-24

Vendor: Cisco
Product: Cisco Unified Communications Manager
Subsystem: route patterns
Deployment: on-premises
Region: us
Release range: Emergency Responder 15 and SUs
Checked: 2026-09-24

Sources

Cisco Emergency Responder Administration Guide, Release 15 and SUs - Configure Cisco Unified Communications Manager — Cisco Systems · tier 2 current vendor documentation · Configure Cisco Unified Communications Manager > ELIN Numbers Emergency Calls and PSAP Callbacks > route patterns for ERLs

Cite this note

APA

WarmTransfer. (2026, September 24). Cisco Emergency Responder setup: source note cisco-emergency-responder-setup-erl-route-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/cisco-emergency-responder-setup-erl-route-pattern

BibTeX

@misc{warmtransfer-claim-cisco-emergency-responder-setup-erl-route-pattern,
  title  = {Cisco Emergency Responder setup: source note cisco-emergency-responder-setup-erl-route-pattern},
  author = {{WarmTransfer}},
  year   = {2026},
  url    = {https://warmtransfer.net/knowledge/claims/cisco-emergency-responder-setup-erl-route-pattern},
  note   = {Source note cisco-emergency-responder-setup-erl-route-pattern, checked 2026-09-24}
}

Read in context