Source note · Setting up a Bandwidth SIP trunk
One SBC vendor's Bandwidth integration article recommends defining one peer entry per Bandwidth proxy address, enabling SIP OPTIONS heartbeats toward both, ordering routes so traffic advances to the second address when the first stops responding, and dropping inbound SIP from every source other than the two Bandwidth addresses.
field report · Checked 2026-09-30
- Vendor
- TelcoBridges
- Product
- ProSBC
- Subsystem
- carrier peering
- Deployment
- on-premises, virtual
- Region
- not restricted
- Release range
- undated
- Status
- field report
- Checked
- 2026-09-30
Sources
- Bandwidth.com SBC Integration — TelcoBridges · tier 5 independent technical research · NAP, SIP OPTIONS keepalive, failover and access-control sections
Cite this note
APA
WarmTransfer. (2026, September 30). Setting up a Bandwidth SIP trunk: source note bandwidth-sip-trunk-setup-other-sbc-field-pattern. WarmTransfer. https://warmtransfer.net/knowledge/claims/bandwidth-sip-trunk-setup-other-sbc-field-pattern
BibTeX
@misc{warmtransfer-claim-bandwidth-sip-trunk-setup-other-sbc-field-pattern,
title = {Setting up a Bandwidth SIP trunk: source note bandwidth-sip-trunk-setup-other-sbc-field-pattern},
author = {{WarmTransfer}},
year = {2026},
url = {https://warmtransfer.net/knowledge/claims/bandwidth-sip-trunk-setup-other-sbc-field-pattern},
note = {Source note bandwidth-sip-trunk-setup-other-sbc-field-pattern, checked 2026-09-30}
}